fbpx
DELIVERY ALL OVER NORTH AMERICA

Online Store

AVAILABLE FOR SMALL FACES OR CHILDREN

Zoom image

ëPRO™

23.59 $ CA

Clear

Prices degressive according to quantity.

For orders of 250 units or more, click here

ASTM F3502-21-level 2 (filtration), level 1 (breathability) & BNQ 1922-900*

* in the process of BNQ attestation (continuous batches attestations) 

 

IMPORTANT NOTICE: This mask is in the process of being attested by the BNQ and we cannot determine the exact date on which the lots will be approved. This situation is unfortunately out of our control. If it’s mandatory for you to wear a BNQ approved face cover in your workplace, we invite you to subscribe to our newsletter HERE and stay informed on the release date. Alternatively, you can get this mask today as it meets the ASTM F3502-21 International Standards for workplaces.

Manufactured in almost full automation, this compact eco-efficient barrier face covering stands out with its 5-pleat build offering an expandable full face coverage, its multi-layered protection reusable for over 100 times while maintaining excellent breathability and its standard-compliant high performances for filtering all sizes of particles. 

 

Scientific Results

Breathability (Differential pressure) (EN 14683:2019) (BNQ 1922-900): 4.4 mmH2O/cm2

Filtration PFE* fine particles (BNQ 1922-900 : TPPP*** 20nm to 800nm): 80.3%

Filtration Coarse particles (3 microns +): 99,7 %

Breathability (Differential pressure) (ASTM F3502-21): 6 mmH2O

Filtration PFE* fine particles (ASTM F3502-21 : Fixed at 75nm**): 72 % 

Flammability (HMIS recommandation: ≤ 1): ëPRO= HMIS 1

 

FEATURES & BENEFITS
  • Materials: EXTERIOR SHELL : Polyester INNER LAYERS : Polypropylene. The absence of treatment or toxic additives allows optimal natural filtration by fibers only. Safe and harmless to you and the planet, durable and proven after more than 100 washes.

 

  • 3 Life Cycles: Designed to be washed and reused over 100 times in the workplace without loss of efficiency. It then begins its second life cycle as a personal mask and, when placed in a Zero Waste box provided for this purpose, its components are entirely recycled or reused. 

 

  • Design: Barrier face covering with highly breathable, high-performance, light and thin technical fabrics. Its compact shape is designed with 5 side pleats that unfold during wear to give a maximum width extent and air exchange surface (breathability) while maintaining an optimal seal around the edges. Flexible nose piece to ensure comfort and prevent fogged glasses. 

 

  • Confort ultime, port prolongé: Carefully designed for restricting contact with the nose and the mouth and reducing the moisture inside the face covering in order to preserve the integrity of its protective barrier. Ultralight and very thin breathable technical fabrics for ease and comfort in hot weather. 

 

  • Accessories: Optional headband or adjustment cord to eliminate pressure on ears and allow touchless removal of face coverings. 

 

 

Proudly created and produced in Canada

TO WEAR THE FACE COVER SAFELY 
  • Wash hands with soap for at least 20 seconds before putting it on and after touching it. Rinse and dry.

  • Handle the mask with the head harness or elastics for putting on and taking off. Avoid touching the inside.

  • Ensure the optimal fit of the mask to completely cover the nose and mouth, as well as to prevent leaks and avoid having to replace the mask.

  • Place the face cover over your nose and mouth and the elastic bands around your ears ou head (depending on model). 

  • Adjust the elastics while keeping the face cover well-centered.

  • Press the metallic wire onto your nose.

  • Ensure that you have a good seal around the face cover. The edge with the metal wire insert must be on top and be worn on your nose.

  • If necessary, use an accessory to improve your comfort or reduce pressure on your ears.

  • Do not touch the face cover again until you take it off.

  • Place it in a sealed bag until you can wash it.

  • Check the condition of the face cover(s) after each wash. If any part appears worn, pierced, unstitched or damaged, it is then time to use a new one and discard this one. Unless it appears to be a stitch that can easily be repaired, you should dispose of the face cover in a zero waste box provided for this purpose.

 

“ MEETS ASTM F3502, SPECIFICATION FOR BARRIER FACE COVERINGS. THIS PRODUCT IS PRIMARILY IN- TENDED AS A MEANS OF SOURCE CONTROL FOR MINIMIZING THE PROJECTION OF EXPELLED MATERIALS FROM THE WEARER’S NOSE AND MOUTH. WARNING: THIS BARRIER FACE COVERING IS NOT A MEDICAL FACE MASK AS DEFINED IN ASTM F2100, IS NOT INTENDED FOR USE IN MEDICAL PROCEDURES, AND IS NOT A RESPIRATOR. ”

 
CARE INSTRUCTIONS
  • Machine wash in warm or hot water at gentle cycle, using regular or natural laundry detergent.

  • If necessary, tie the elastic loops to ensure they don’t come off in the machine. 

  • Ideally place the mask(s) in a mesh or net bag and wash with clothes or towels to increase durability.

  • Place the face cover(s) in a mesh or net bag and wash it with light colored clothes or towels that are not too dirty to increase durability.

  • Do not use fabric softener.

  • Hang or lay flat to dry.

  • Wash or discard safely the bag used to carry the face cover.

IMPORTANT NOTICE
  • When hesitating between 2 sizes, it is recommended to choose the larger one to insure proper breathability and fit.

  • The user shall choose the proper model or proper size to cover their face from nose to chin and allow proper fit of the top, sides and bottom of the face covering.

  • It is recommended to change the mask if it is wet, visibly dirty, damaged or if breathing is difficult; moisture in materials affects breathability.

  • It is recommended that you do not wear a face cover for more than four hours.

  • Wearing a mask does not replace hand washing, respiratory etiquette and environmental cleanliness. Wearing a face covering should not reduce efforts to promote physical distance.

  • The same mask should only be used by the same person.

  • Not following cleaning conditions and safe use decreases the protection offered by the face covering and increases the risk of infection.

  • Barrier face coverings should not be placed on very young children (<2 years) or anyone who has trouble breathing, or anyone who is unconscious, incapacitated, or otherwise unable to remove the barrier face covering without assistance.

  • Barrier face coverings with Level 1 airflow resistance may not be suitable for children or for adults that have difficulty breathing and a barrier face covering with Level 2 airflow resistance is recommended.

  • Barrier face covering contains metal and should not be worn during MRI procedures.

Let's keep in touch!

In order to stay informed on our latest products and news, please fill out the form below